Tips in the Installation of Central Air Conditioni

Tips in the Installation of Central Air ConditioningThe power of the indoor central air conditioning unitThe power of the indoor unit size is determined by a serious of factors. First, we should consider the size and orientation of the house, to judge if there is a large area of glass windows, in order to calculate the maximum coefficient of central air conditionerused simultaneously. Generally, in a normal home environment, the actual use of cold is often more than the entire room cold comprehensive, but lower than that of the latter, the former needs only about 60-70%. This saves investment and to avoid unnecessary waste.The form of the air outlet The general household central air conditioning is the flow of air side, it is a good air supply to ensure the uniformity of the temperature of the room. Sometimes for aesthetic also the air-conditioning on the cabinets above the side sending side back then you have to do, when to do side the send side back and bottom feed next time pay attention to the supply and return air to a certain distance to prevent back to the wind short circuit.THE EVAPORATIVE CONDENSING MODULARIZED CHILLERThe mounting position of the switchThe installation position of the indoor unit is mainly to take into account the circulation of the air flow to achieve as far as possible to avoid the dead angle occurs, and this can allow the temperature of the room evenly. Thermostat and light switches installed together, to be installed in accordance with the habits of the people into the room, the light switch inside, because the person entering the room is to turn on the lights and ceiling air conditioner. The installation of the thermostat to avoid the heat and air conditioning vents straight into place, so that the detected temperature will not be allowed.The installation of the outdoor air conditioning unitHome central air conditioner outdoor unit is generally installed on the platform, and there is a small number of hit hanging on the wall bracket. When is Installed on the platform, it must be done in the machine and between platforms damping treatment, generally add damping rubber mat. And hanging on the wall, to take into account the weight of the load-bearing wall and the unit’s operation, due to the heavy weight of the home central air conditioning, to hang on the wall penetrated the wall screws to secure more firmly, at the same time, the machine and stent between damping have to add a rubber pad.www.airconditionings.cn’s products were awarded many kinds of titles, such as National Machinery Industry Famous Brand Products, China Top Brand and so on. Besides, Shenling has very strong R & D strength. We have established a national postdoctoral scientific research workstation and two provincial technical centers. Shenling has also constructed four state-level product performance- testing centers for packaged air conditioners, high-temperature-use air conditioners, air and water- cooled chillers.

Tagged with:
Posted in aaa

The Developing Prospect of IC Card

The Developing Prospect of IC CardIC card application development prospectsIn the decade, China’s IC card application will enter a period of rapid, healthy and orderly development; related areas of social life to establish advanced the practical contactless ic card application system; establish a more mature application of technical standards for various types of IC card business norms and regulations; China will become one of the world advanced level of application, issuance volume most countries.IC card applications benefit prospectsTaking the use of IC card to do identity proof, storage and processing of digital certificates, enhanced authentication capabilities, reduce social fraud, maintain normal social order of life; using the IC card is convenient, fast and safe shopping entertainment, tourism spending, reduce the money in circulation; enterprises or government departments using the IC card application system and improve the level of organization and management, and enhance the dynamic management capabilities, and timely data statistical analysis, to provide a basis for the macro decision-making, and is conducive to the level of service.PVC MATTE RFID LOYALTY CARDIC card applications supporting industry prospects(1)Promote the industry. The creation and development of supporting for the Golden Card Project IC card industry, including proximity card chip design and manufacturing, IC card module, card-based and card, POS, and ATM machines, IC card reader equipment and related chip operating system and related safety products, related software and application system integration, electronic information industry will become a new economic growth point. (2)Promote the development of supporting industries. Information construction in China must be based on the national electronic information industry development based on the second generation ID card will greatly promote the development of the IC card industry, the first-generation ID card issued 1 billion since 1984, and thus the second-generation The ID card will become the world’s largest number of IC Card. (3)Make efforts to explore various fields of application of the cross-industry sector. The cross-industry applications is the development of international smart card new trends such the Singapore electronic wallet CASHCARD can be used to highway fees, parking fees, libraries, schools, and online transactions; cross-border use of electronic wallet – based Visa Universal electronic wallet has in the pilot of Belgium, the Netherlands, Spain and other countries, to achieve the electronic wallet online authentication and payment functions.The combination of our bank smart card industry card greatly promotes the application of a pay-based “multi-purpose card” (such as fuel cards, transportation cards, social security cards, campus cards, etc.), and IC cards. This direction is bound to become a development trend of China’s intelligence. www.lbdtech.com always upholds the spirit of “people-oriented, and technology is the core”. Set quality as fundamental strategic, we continuously innovate and use advanced production equipment and strong technical force to strictly manage production, to strengthen quality control, and to strive to provide satisfaction high quality products for the majority of users.

Tagged with:
Posted in Bathroom Accessory

Installation of Central Air Conditioning

Tips in the Installation of Central Air ConditioningThe power of the indoor central air conditioning unitThe power of the indoor unit size is determined by a serious of factors. First, we should consider the size and orientation of the house, to judge if there is a large area of glass windows, in order to calculate the maximum coefficient of central air conditionerused simultaneously. Generally, in a normal home environment, the actual use of cold is often more than the entire room cold comprehensive, but lower than that of the latter, the former needs only about 60-70%. This saves investment and to avoid unnecessary waste.The form of the air outlet The general household central air conditioning is the flow of air side, it is a good air supply to ensure the uniformity of the temperature of the room. Sometimes for aesthetic also the air-conditioning on the cabinets above the side sending side back then you have to do, when to do side the send side back and bottom feed next time pay attention to the supply and return air to a certain distance to prevent back to the wind short circuit.THE EVAPORATIVE CONDENSING MODULARIZED CHILLERThe mounting position of the switchThe installation position of the indoor unit is mainly to take into account the circulation of the air flow to achieve as far as possible to avoid the dead angle occurs, and this can allow the temperature of the room evenly. Thermostat and light switches installed together, to be installed in accordance with the habits of the people into the room, the light switch inside, because the person entering the room is to turn on the lights and ceiling air conditioner. The installation of the thermostat to avoid the heat and air conditioning vents straight into place, so that the detected temperature will not be allowed.The installation of the outdoor air conditioning unitHome central air conditioner outdoor unit is generally installed on the platform, and there is a small number of hit hanging on the wall bracket. When is Installed on the platform, it must be done in the machine and between platforms damping treatment, generally add damping rubber mat. And hanging on the wall, to take into account the weight of the load-bearing wall and the unit’s operation, due to the heavy weight of the home central air conditioning, to hang on the wall penetrated the wall screws to secure more firmly, at the same time, the machine and stent between damping have to add a rubber pad.www.airconditionings.cn’s products were awarded many kinds of titles, such as National Machinery Industry Famous Brand Products, China Top Brand and so on. Besides, Shenling has very strong R & D strength. We have established a national postdoctoral scientific research workstation and two provincial technical centers. Shenling has also constructed four state-level product performance- testing centers for packaged air conditioners, high-temperature-use air conditioners, air and water- cooled chillers.

Tagged with:
Posted in Bathroom Accessory

The Developing Prospect of IC Card

The Developing Prospect of IC CardIC card application development prospectsIn the decade, China’s IC card application will enter a period of rapid, healthy and orderly development; related areas of social life to establish advanced the practical contactless ic card application system; establish a more mature application of technical standards for various types of IC card business norms and regulations; China will become one of the world advanced level of application, issuance volume most countries.IC card applications benefit prospectsTaking the use of IC card to do identity proof, storage and processing of digital certificates, enhanced authentication capabilities, reduce social fraud, maintain normal social order of life; using the IC card is convenient, fast and safe shopping entertainment, tourism spending, reduce the money in circulation; enterprises or government departments using the IC card application system and improve the level of organization and management, and enhance the dynamic management capabilities, and timely data statistical analysis, to provide a basis for the macro decision-making, and is conducive to the level of service.PVC MATTE RFID LOYALTY CARDIC card applications supporting industry prospects(1)Promote the industry. The creation and development of supporting for the Golden Card Project IC card industry, including proximity card chip design and manufacturing, IC card module, card-based and card, POS, and ATM machines, IC card reader equipment and related chip operating system and related safety products, related software and application system integration, electronic information industry will become a new economic growth point. (2)Promote the development of supporting industries. Information construction in China must be based on the national electronic information industry development based on the second generation ID card will greatly promote the development of the IC card industry, the first-generation ID card issued 1 billion since 1984, and thus the second-generation The ID card will become the world’s largest number of IC Card. (3)Make efforts to explore various fields of application of the cross-industry sector. The cross-industry applications is the development of international smart card new trends such the Singapore electronic wallet CASHCARD can be used to highway fees, parking fees, libraries, schools, and online transactions; cross-border use of electronic wallet – based Visa Universal electronic wallet has in the pilot of Belgium, the Netherlands, Spain and other countries, to achieve the electronic wallet online authentication and payment functions.The combination of our bank smart card industry card greatly promotes the application of a pay-based “multi-purpose card” (such as fuel cards, transportation cards, social security cards, campus cards, etc.), and IC cards. This direction is bound to become a development trend of China’s intelligence. www.lbdtech.com always upholds the spirit of “people-oriented, and technology is the core”. Set quality as fundamental strategic, we continuously innovate and use advanced production equipment and strong technical force to strictly manage production, to strengthen quality control, and to strive to provide satisfaction high quality products for the majority of users.

Tagged with:
Posted in Bathroom Accessory

The Development of Glass Machinery

The Development of Glass MachineryMechanical development of the container class glass contains mainly the following aspects: improve the mechanical positioning accuracy of suppress class equipment, good stability, low failure rate and development or even three double gob press molding process. tempered glass panels pressure blowing class seeks a breakthrough in manufacturing high-precision container products, which seamlessly turn pressure blowing machinery. The centrifugal molding is to reduce glassware materials, reduce the cost of the mold of the important process and fully develop the automated multi-station centrifugal mechanical hot market. The determinant bottle making machinery is developing toward the trend of high-precision and high-yield. The key technology to improve the surface quality of the glass products is flame polishing of the surface of the article, how to improve the precision and degree of automation of the polishing machine to accommodate a large number of mass-produced; glass products process between the transmission is developing toward the requirement of automation, which is able to adapt to the needs of the many varieties more specifications. The tempered glass panelsGlass mechanical polyurethane timing belts and polyurethane timing belt is composed of thermoplastic polyurethane and high strength steel wire. It has high strength, high toughness, low noise, small deformation, wear, oil, acid, and anti-aging properties. Polyurethane timing belts can withstand the high temperature of 110 ℃ instantly without polluting. It needs no lubrication and maintenance in the process of use of glass edging machine.Products are widely used in textile printing and dyeing, tobacco, printing, printing, packaging, glass, ceramics and other industries. The laminated glass panels plays an important role in the room lighting and insulation. Full oxygen combustion energy-saving technological transformation can save energy and the whole plant can reach “zero electricity”, which can greatly reduce energy consumption.The feature of glass machineryGlass machinery has the advantages of a simple structure, small size, high power transmission, constant transmission ratio, basic maintenance-free and long life, and these characteristics determine its using scope will be more and more widely, which is not just for the glass machinery, but is also widely used in cement machinery and other mechanical equipments.www.glass-factory.net is a modern enterprise which is professional on high-class glass processing. Located in Huadu District, Guangzhou, Guangdong Province, our company neighbors 107 National Road, Guangzhou-Qingyuan highway, Huadu Port and Guang zhou Baiyun International Airport, so we process great advantages of convenient waterway, overland and aerial transportation.

Tagged with:
Posted in Bathroom Accessory

The Development of Glass Machinery

The Development of Glass MachineryMechanical development of the container class glass contains mainly the following aspects: improve the mechanical positioning accuracy of suppress class equipment, good stability, low failure rate and development or even three double gob press molding process. tempered glass panels pressure blowing class seeks a breakthrough in manufacturing high-precision container products, which seamlessly turn pressure blowing machinery. The centrifugal molding is to reduce glassware materials, reduce the cost of the mold of the important process and fully develop the automated multi-station centrifugal mechanical hot market. The determinant bottle making machinery is developing toward the trend of high-precision and high-yield. The key technology to improve the surface quality of the glass products is flame polishing of the surface of the article, how to improve the precision and degree of automation of the polishing machine to accommodate a large number of mass-produced; glass products process between the transmission is developing toward the requirement of automation, which is able to adapt to the needs of the many varieties more specifications. The tempered glass panelsGlass mechanical polyurethane timing belts and polyurethane timing belt is composed of thermoplastic polyurethane and high strength steel wire. It has high strength, high toughness, low noise, small deformation, wear, oil, acid, and anti-aging properties. Polyurethane timing belts can withstand the high temperature of 110 ℃ instantly without polluting. It needs no lubrication and maintenance in the process of use of glass edging machine.Products are widely used in textile printing and dyeing, tobacco, printing, printing, packaging, glass, ceramics and other industries. The laminated glass panels plays an important role in the room lighting and insulation. Full oxygen combustion energy-saving technological transformation can save energy and the whole plant can reach “zero electricity”, which can greatly reduce energy consumption.The feature of glass machineryGlass machinery has the advantages of a simple structure, small size, high power transmission, constant transmission ratio, basic maintenance-free and long life, and these characteristics determine its using scope will be more and more widely, which is not just for the glass machinery, but is also widely used in cement machinery and other mechanical equipments.www.glass-factory.net is a modern enterprise which is professional on high-class glass processing. Located in Huadu District, Guangzhou, Guangdong Province, our company neighbors 107 National Road, Guangzhou-Qingyuan highway, Huadu Port and Guang zhou Baiyun International Airport, so we process great advantages of convenient waterway, overland and aerial transportation.

Tagged with:
Posted in Bathroom Accessory

The Introduction about Finish Foil

Finish foil are widely used in various wood like surfaces, out of which there are made different furniture to the living room, kitchen and bathroom. The usage of the finish foil is also known in production of wall panels, baseboards and inner door. In the production it usually uses papers with 55-80g/m2 of gram-mage, on which there are intaglio top trendy patterns appearing at the current market.

finish foil

Finish foil can be used in decorative materials, such as fantasy finish foil, stone texture finish foil. Here I will introduce the advantages of finish foil: surface treatment meets the standard of Europe and America; environment friendly, degradable, better than PVC; Surface is with full coating, smooth; Texture is clear and vivid. It is widely used for all kinds of panels’s furniture and the curve surface.

What does foil affect finish mean in furniture? Is this rubbish furniture? It is the material used for the surface of the fibred-board. It is a high quality surface layer for ‘MDF’ (fibre-board). Foil is fine in bedrooms and offices for worktops. Melamine is extremely tough and makes better worktops in kitchens than foil. It is softer to the touch than melamine, which is hard and brittle and it can be produced with a photograph of timber on it, for example, like pine or maple, or oak etc. whereas melamine only holds a random pattern or is plain. Foil can be plain also.

http://www.i-decors.com/ was established on January 2010 (the import and export window of T&Y Group), engage in the sales and marketing of various products and technologies of the group. Its main products are printing papers, melamine papers, finish foil, polyester paper, PU paper etc., and product size is from 790mmto 2130mm. It is widely used for furniture, laminated floor, cabinet, HPL, MDF etc.

The article comes from:http://www.i-decors.com/news/33.htm

Tagged with: ,
Posted in decorative materials

How To Choose A Prefab House

Prefab house, the use of increasingly wide range of its structure and it is reliable, flexible, long life time, specifications and diverse; it is widely used in offices, conference rooms, light steel plant, light steel exhibition hall, Showground, light steel booth, fence.Before you buy a prefab house, you should confirm the following things along with color, texture, board.

prefab house
Firstly, to determine the location of the prefab house is installed.

Secondly, make sure the specific of built-up area of prefab house

Thirdly, draw up your prefab house’s appearance scheme

Fourthly, decide the design drawings.

Fifthly, the designer quoted price in accordance with the design drawings for quotation.

Finally, customers decide the prefab house price.

To consider the use of integrated functions, the natural environment, economic and other factors, the most critical is to meet the functional requirements, depending on the choice of different activities using the function room type.

Type one, if you live in a small housing area, in order to expand living space, housing construction activity requiring high economic level of privacy can opt for a lower roof prefab house, plastic-steel windows plus insulation wall for peripheral maintenance products. These products,though not strictly a sun room, but the price is low, economical and practical. Drawback is poor lighting, ventilation in general. Additional skylights will have greatly improved.

Type two: if it is necessary traditional architectural features (such as: Specialty living room, study, activity room, etc.) of the color plate, should choose steel hollow glass roof, and with appropriate special hollow glass skylights to bridge aluminum hollow glass window or aluminum wood composite hollow glass windows for peripheral maintenance products,such as prefab villa:

Type three, if you are in a large housing area, especially villa building your color plate is mainly used for winter recreation, fitness, gardening, etc., should choose to open the roof can be moved as a whole moving color plate. Such activities will not have insulation board room category color plate lighting is poor, fixed skylights class activities room summer indoor temperature is high. Besides, Yaoda’s Huadu Villa is a good choice.

ype four, if you build color plate mainly for winter working in the garden, it requires prefab house to have good ventilation, adequate sunshine, should use for plastic-steel windows surrounding maintenance, and opened a large glass roof skylight color plate activity room. Such prefab houses prices are not high, but you need to configure summer indoor temperature is higher sunscreen.

Yaoda Building Material Co., Ltd. is specialized in design and production of prefab house and environmental material. Our main products include: prefabricated slope-style house, prefabricated flat-style house, prefabricated villa, security room and prefabricated fences, etc.Depending on our professional engineers, most of our products got the design patent. Therefore, our products are not only welcomed by our homeland customers, but also popular among many foreign countries, such as Australia, Qatar, Iran, Sudan, Angola and East-south Asia, Middle East and other regions, etc.

The article comes from:http://www.chinaprefabhouse.com/News/195.htm

Tagged with: ,
Posted in prefab house

Dongpeng Leads the Ceramic Tile Industry Through Technology Innovation

In 2013, Chinese ceramic industry gains the world’s attention by innovation and technology. Dongpeng, as a Chinese ceramics enterprises, became the first one in China to participate in CERSAIE, the world’s biggest ceramics exhibition. It invented hard and transparent Royal Jade Tiles and Amazon Series Tiles, which turned out to subvert the existing standard of “hard but hardly transparent, transparent but hardly hard”. It also made the innovative air purifying ceramic floor tile and wall tile.

Dongpeng gets market shares with innovation and wins the world’s recognition with cutting-edge technology. It finds a way out to self-upgrade and build its own brand under the fierce competition.

Dongpeng Leands the Industry From “Manufacturing” to “Innovating”
In many people’s opinion, ceramics is a traditional industry which need little technology and innovation. Chinese ceramic enterprises is reluctant to invent new types of ceramic tiles because they are easily copied, which leads to intensified competition in low-end ceramic tile market in the 1990’s.

In 1996, Dongpeng’s managers realized that they should not continue to combat with other enterprises in the low-end market, for their profit would continues to decrease. Therefore, they decided to march into the high-end market with technology and product innovation.

Mr. He Xinming, Dongpeng’s current CEO, occasionally found a raw material call “perlato svevo”, which is with bright color and high glossiness. Decorative ceramic tile made from this material can create luxury decorative effect but it is quite expensive. In order to develop a material comparable to “perlato svevo”, Mr. He and other technicians began to do in-depth research and they finally made out the first “perlato svevo” tile after trials and errors. “This product was so great that it enables large increase in our sales and it helped us make up the deficits and get surpluses. It also led the tile trend at that time,” said Mr. He.

woord grain porcelain tile

After such a great success, dongpeng puts more effort in product and technology innovation. It take out 3% of annual revenue as R&D funds and has set up provincial engineering ceramics technology research center, established the industry’s first post-doctoral workstations and cooperated with the world’s famous research institutions and design centers. Carrara, Travertine, Navona, Super Travertine, Crystal Porcelain Tile, Amazon Tile and Air Purifying Tile, etc. are all invented by Dongpeng. These products are with either new design or new function, which got international national patent and quickly got market shares.

Besides products design, Dongpeng ceramics also enhance their product function. “We can not simply sell tiles, but we should try to make our tiles the fashion clothes of consumers’ house,” said Mr. He. Through investment in the product application design, Dongpeng effectively increase added value to its products and turn itself from selling tiles to selling space solutions, as well as from selling products to selling culture.

At the same time, Dongpeng has invested more on new design, new technology and new materials, which leads to a number of ceramic sanitary wares with new applications.

Many Dongpeng products and technologies have ranged first-class in the world. “Chinese enterprises should step over the period of manufacturing and march to innovation and creation, if they want to gain a foodhold in the global market, ” added by Mr. He.

This article comes from:http://www.dongpeng.com/News/257.htm

Tagged with: ,
Posted in ceramic floor tile

Dongpeng Releases Innovatively New Product – Air-purify Tile

kind of tile had been under painstaking development for 4 years before its release. It is an innovative tile that can achieve four functions which are air purification, humidity control, odors elimination and home decoration.

With a strong technical innovation ability, Dongpeng ceramics once again becomes a pioneer of product category development and leads the trend of the industry. Under the circumstance that people are more concern about healthy life and home environment, Dongpeng undoubtedly opens up a new market.

Category Subdivision, Consumer Focusing

Ceramic tile industry, like ceramic floor tile industry, is undergoing assimilation nowadays and price competition is intensified. In order to find a way out of the current situation, some innovative companies in the industry have accelerated the pace of innovation and new technologies and products continue to emerge.

Dongpeng always pays close attention to the industrial trends and consumers’ needs. It has been adhering to the tenet that “building brand with quality, promote brand with technology and spread brand with public praise”. It focus on consumers’ demands based on cutting-edge technology.

Dongpeng air-purify tile is a great breakthrough which is cross-sectoral, cross-disciplinary and interdisciplinary. Its market prospect is promising, with more than 80 partners signed contract with Dongpeng within 7 days after its release.

woord grain porcelain tile

Independent R&D, National Patent Got

Dongpeng got its original idea from continuous focus on consumers’ demand. Its technicians made technological breakthroughs in both harmful gases elimination and decomposition as well as décor functions. This new decorative ceramic tile has got Chinese national patent.
There are also other air-purify tiles in the foreign market, but they are with high prices and single colors, which can not meet the décor demands of most consumers. Dongpeng air-purify tile can not only purify air, but also meet the décor demand with colorful designs. It is suitable to be used in projects like toilets and smoking areas in public places, infirmary clubs, hospitals, libraries, museums, children’s rooms and old people’s houses, etc.

Eco-friendly Feature and Outstanding Design, More Market Shares Taken

Core competency of Dongpeng has been stronger and stronger and its leadership in the industry has become increasingly prominent. It is said that Dongpeng proprietary patented technologies have reached 286, in which some key independent innovation products technologies and core technologies have reached international advanced level, which won the world the respect.
Dongpeng air-purify tiles are only 6mm in thickness, which saves raw materials and energy consumption in production. It is said that Dongpeng will take this new tile to the CERSAIE to show the world of Chinese tile breakthough.

This article comes from:http://www.dongpeng.com/News/255.htm

Tagged with: ,
Posted in ceramic floor tile