Soft bottom rubber boats
The economical boat, such as the mini rubber boats or miniature rubber boats is very easy to install, and very easy to carry. They are more suitable for use in the waters of the coast and a small range, fishing or camping. Their backplane is inflated, and it not needs to be removed when it is stored.inflatable rubber boat is driven by the oars or electric motors, the price of the rubber dinghy is the lowest, and the functions are the most basically.
The baseboard of the inflatable boat is detachable, and it is generally made of composite wood, synthetic plastics and aluminum alloy. Fix the aluminum slot through the backplane side from both sides of the card firmly together into a whole. After the installation of floor, and the inflating of the left and right side air chamber and a conical keel gas chamber, and the bilge is taunted to form a shallow V-shaped, which makes the ratio punt have a better cornering tracking and drainage. This backplane of inflatable motor boats form makes it heavier than the rubber boats, but 6-25 hp outboard motors can be installed and run faster, and the cost performance is excellent.
Inflatable backplane boats
A sport boat, such as 275 or 310, and it becomes the HP inflatable bottom boat (sometimes also called inflatable floor boats), if the wooden floor is replaced by the high pressure inflatable backplane. It is a collection of excellent performance sport boats and soft bottom boat lightweight portability. Its unique high-pressure inflatable floor (Pressure fight to 11psi) is very light. When it is deflated, it can be rolled in a boat. This is thanks to its smaller weight. For example, to our 60lb (30KG weight) 310 inflatable the backplane boat in one ride, 5-horsepower outboard motor-driven case could take off. The entire ship can be slightly bent and happens to absorb the impact of the waves, and this wave in hardground may throw people away. Despite a little more expensive than conventional sports boat, it is a collection of a lot of advantages, and not mediocrity. Installation time is very short.
High-pressure inflatable (HP-V) inflatable boat
The unique HP-V floor technology is a change in 2008, the essence of its irremovable floor is the high pressure backplane of the Rollups the boat, and this performance makes this inflatable boat almost similar to the RIB boat. Another change is that the HP-V the backplane replaced the original sausage-shaped inflatable keel. Cabin items are lower than the gondola position and the low center of gravity can thus provide a better stability than the RIB boats.
www.inflatableboat8.com adopts the Computer Aided Design and Drafting Systems (CADD ) to realize the inflatable boat designing. We have a team of talented designers, and we have already built close connections with European engineers of crafts to guarantee our unique fashion design and accordant high standard to our products.